El reposicionamiento malar. Presentación de una técnica original: punto MM / Malar repositioning. Presentation of an original technique: point MM

El envejecimiento facial es una sinergia compleja de cambios texturales de la piel, hiper- o hipoactividad muscular, reabsorción del tejido graso y resorción ósea. El déficit de volumen resultante, la deflación y la posterior caída del tercio medio facial produce una cara menos atractiva y juvenil. Los procedimientos inyectables en región malar son cada vez más populares y solicitados por los pacientes. El conocimiento de la anatomía de la cara media es fundamental para el inyector. La comprensión de la irrigación facial puede ayudar a disminuir la exposición a la aparición de hematomas y complicaciones vasculares severas. Existen múltiples técnicas de inyección propuestas para el tercio medio, en este artículo presentamos una técnica original, simple, segura y eficaz con resultados satisfactorios y riesgo reducido

Facial aging is a complex synergy of textural skin changes, muscle hyperactivity, fat dysmorphism, bone resorption. The resulting volume deficit and deflation of the mid face produces a less attractive and youthful face. Injectable midface procedures are becoming increasingly popular and requested by patients. Knowledge of the anatomy of the midface is critical for the injector. Understanding the irrigation of the face can help decrease the risk of hematoma and severe vascular complications. There are multiple injection techniques proposed for the middle third, in this article we present a simple, safe and effective technique with satisfactory results and lower risk

Respiratory fit test panel representing population of Malaysia.

BACKGROUND: The existing respiratory fit test panels (RFTPs) are based on Bivariate and Principal Component Analysis (PCA) which utilise American and Chinese head and facial dimensions. As RFTPs based on local facial anthropometric data for Malaysia are not available, this study was conducted with the aim to develop new RFTPs using Malaysian data. METHODOLOGY: A cross-sectional study was conducted across Malaysia among 3,324 participants of the study of National Health and Morbidity Survey 2020 aged 18 and above. Ten head and facial dimensions were measured. Face length and face width were used to construct bivariate facial panel, whereas the scores from the first two PCA were used to develop the PCA panel. RESULTS: This study showed that Malaysians have the widest upper limit for facial width. It also found that three factors could be reduced from the PCA analysis. However only 2 factors were selected with PCA 1 representing head and facial size and PCA 2 representing facial shape. Our bivariate panel could accommodate 95.0% of population, while our PCA panel accommodated 95.6%. CONCLUSION: This was the first study to use Malaysian head and facial anthropometry data to create bivariate and PCA panels. Respirators constructed using these panels are likely to fit ≥ 95.0% of Malaysia's population.

The forensic imaging technique of age progression used within missing people cases: The Italian Missing Children association realizing age progression for Missing Child Kenya.

The age progression technique allows to update identification photos of individuals who have been missing for years. This method is based on the study of the facial variation and on the dynamics of facial growth. Knowledge about changes in the distribution of facial fat and the tone of the cartilage allows realistic predictions of the facial appearance after many years. Beside these elements, age progression is also supported by similar characters between family members. This is why photos of the missing and family members are used to create an age progression, making the new identikit accurate. Non-profit associations are crucial for the dissemination of information on the problem of missing persons. In Italy, the Italian Missing Children association provides for free an age progression service with the support of forensic anthropology. With the activation of a protocol, consisting of guidelines, and a form for the request for age progression by family members, the Italian Missing Children has started a collaboration with Missing Child Kenya. It allowed to disseminate up-to-date photos of the presumed current appearance of the missing children in Kenya. Thus, in the present study some cases are reported, in which age progression technique was applied. The photos provided by Italian Missing Children were shown in video documentaries made by Missing Child Kenya, allowing to continue the dissemination of age progression photo during the Covid quarantines and to keep the population active in the search for the missing.

Face anthropometry for filtering facepiece respirators: analysis of the association between facial dimensions and respirator fit.

OBJECTIVE: Ensuring proper respirator fit for individuals remains a persistent challenge in occupational environments, yet there is limited knowledge about how respirators interact with the face to "'fit." Previous studies have attempted to understand the association between face dimensions and respirator fit using traditional head/face anthropometry not specifically tailored for respirators. The purpose of this study was to assess and compare the ability of filtering facepiece respirator (FFR)-specific face anthropometry with traditional head/face anthropometry in exploring the relationship between facial dimensions and the fit of FFR. METHODS: The study utilized 3D face scans and quantitative fit factor scores from 56 participants to investigate the relationship between face anthropometry and FFR fit. Both FFR-specific and traditional anthropometric measurements were obtained through 3D anthropometric software. Intra-correlation of anthropometry was analyzed to evaluate the efficiency and effectiveness of FFR-specific and traditional anthropometry respectively. Principal component analysis (PCA) was conducted to test the usefulness of the PCA method for investigating various facial features. Logistic regression was used to develop fit association models by estimating the relationship between each face measurement set and the binary outcome of the fit test result. The prediction accuracy of the developed regression models was tested. RESULTS: FFR-specific face anthropometry consists of a set of measurements that can inform the detailed facial shape associated with the FFRs more effectively than traditional head/face anthropometry. While PCA may have been effective in reducing the variable dimensions for the relatively large parts of the human body such as upper and lower bodies in previous literature, PCA results of FFR-specific and traditional anthropometry were inconsistent and insufficient to describe face dimensions with complex anatomy in a small-detailed area, suggesting that facial shape should be understood through a variety of approaches including statistical methods. Logistic regression analysis results confirmed that the association models of FFR-specific face anthropometry were significant with higher prediction accuracy and had a better model's goodness of fit than those of traditional head/face anthropometry in 3 conditions inputting all measurements, all PC scores, or top 5 measurements from PCA. CONCLUSIONS: The findings showed that the FFR fit association model enables an understanding of the detailed association between face and respirator fit and allows for the development of a system to predict respirator fit success or failure based on facial dimensions. Future research would include testing the validity of the model and FFR-specific measurement set on different respirator types, expanding the population set, and developing an integrated approach using automated and machine learning technologies to inform FFR selection for occupation workers and the general population.

[Soft and hard tissue changes of hyperdivergent class â ¡ patients before and after orthodontic extraction treatment].

OBJECTIVE: To investigate the hard and soft tissue changing trend and contributing factors of skeletal class Ⅱ hyperdivergent patients before and after orthodontic camouflage treatment by analyzing the cephalogram and the three dimensional (3D) facial scan data. METHODS: Eighteen skeletal class Ⅱ hyperdivergent adult female patients who finished camouflage orthodontic treatment were selected. Skeletal and dental measurements were carried out with the cephalometric analysis before and after the treatment. 3D facial data before and after orthodontic treatment were acquired and the anatomical landmarks were set after the repositioning and superimposition process. Hard tissue measurement included 17 mea-surement indicators (sella-nasion-subspinale angle, sella-nasion-supramental angle, subspinale-nasion-supramental angle, facial angle, angle of convexity, Frankfort horizontal plane-mandibular plane angle (FH-MP), Y axis angle, sella-nasion plane-mandibular plane angle (MP-SN), pogonion-nasion-supramental distance, upper incisor-nasion-subspinale distance, upper incisor to sella-nasion, lower incisor-nasion-supramental distance, lower incisor-nasion-supramental angle, upper incisor to lower incisor, upper incisor to sella-nasion, lower incisor-mandibular plane angle, and Z angle), and the changes before and after treatment were measured for 11 of them. Twenty soft tissue landmarks (left/right cheekbone, left/right chelion, left/right crista philtra, soft tissue gnathion, left/right gonion, glabella, labrale infe-rius, labrale superius, soft tissue menton, left/right mid-mandibular border, soft tissue pogonion, stomion superius, sublabial, subnasale, and supralabial) and 9 soft tissue indicators (lower lip height, facial convexity, lower vermilion height, mandibular contour, nasolabial angle, philtral length, philtral width, upper lip height, and upper vermilion height) were measured and recorded for treatment changes. Linear-regression analysis and correlation analysis were carried out for analyzing the relationship between hard and soft tissue changes before and after the treatment. RESULTS: Significant differences were noticed for 18 out of the 20 cephalometric measurements and facial measurements before and after the treatment (P < 0.05), which mainly represented the sagittal retraction of lip area after the treatment. Significant vertical displacements were revealed for soft tissue menton after treatment [(1.88±2.61) mm, P < 0.05]. Significant sagittal displacements were revealed for left/right cheilion [(-2.95±1.9) mm, (-2.90±1.92) mm], labrale inferius[(-4.94±1.95) mm], labrale superius[(-3.25±1.44) mm], sublabial [(-3.10±3.5) mm], and subnasale [(-1.23±1.06) mm] after treatment (P < 0.05). An average of 4.10°±2.57° increasement was noticed for Z angle after treatment. High correlation (r>0.7) was noticed for the displacement of menton after treatment with FH-MP, with the rate of -0.183 :1, and MP-SN, with the rate of -0.157 :1. Moderate correlations (0.7≥r>0.4) were noticed for the other measurements with correlations (P < 0.05). CONCLUSION: A certain extent of facial improvements could be achieved with orthodontic camouflage treatment for skeletal class Ⅱ hyperdivergent patients, which were mostly represented by the improvement of sagittal relationship of nose, lips, and chin. Certain correlations were noticed for the hard and soft tissue changes.

[The experience of comparing reconstructions of the external appearance made on skulls with existing lifetime photographs]. / Opyt sopostavleniya rekonstruktsii vneshnego oblika, vypolnennykh po cherepam, s imeyushchimisya prizhiznennymi fotografiyami.

The conducted research is aimed at correcting the method of graphic reconstruction of the appearance based on the skull. The method is widely used in both anthropology and criminology. The Forensic Center of Ministry of Internal Affairs of Russia was sent the skulls for which there were lifetime photographs. The restoration of the appearance in the form of graphic reconstructions was carried out by students who completed the course of Anthropological reconstruction at the RSUH, under the guidance of Prof., head of the Laboratory E.V. Veselovskaya. Strictly after the restoration of the appearance was completed, lifetime photos were provided, on the basis of which the degree of similarity of the reconstruction with the original was assessed. The purpose of the experiment is to correct the method of graphic reconstruction of the appearance based on the skull and supplement it with new details. Anthropologists carried out gender and age determination of individuals for a more accurate representation of appearance. Based on the results of comparing lifetime photographic images with the performed reconstructions, it can bed that their overall satisfactory level of compliance is sufficient for correct identification. However, a number of inaccuracies have been identified. As a result, areas of the face have been identified that require further refinement of the method of anthropological reconstruction. So, the thickness, and especially the shape, of the lips turned out to be an unresolved problem. The size of the iris is an important physiognomic feature. It is recommended to clarify the definition of the skull of the lifetime physiognomic height of the face, the width of the nose and the distance between the nasolabial folds.

Enhancing Face Recognition With Detachable Self-Supervised Bypass Networks.

Attributed to the development of deep networks and abundant data, automatic face recognition (FR) has quickly reached human-level capacity in the past few years. However, the FR problem is not perfectly solved in case of large poses and uncontrolled occlusions. In this paper, we propose a novel bypass enhanced representation learning (BERL) method to improve face recognition under unconstrained scenarios. The proposed method integrates self-supervised learning and supervised learning together by attaching two auxiliary bypasses, a 3D reconstruction bypass and a blind inpainting bypass, to assist robust feature learning for face recognition. Among them, the 3D reconstruction bypass enforces the face recognition network to encode pose independent 3D facial information, which enhances the robustness to various poses. The blind inpainting bypass enforces the face recognition network to capture more facial context information for face inpainting, which enhances the robustness to occlusions. The whole framework is trained in end-to-end manner with two self-supervised tasks above and the classic supervised face identification task. During inference, the two auxiliary bypasses can be detached from the face recognition network, avoiding any additional computational overhead. Extensive experimental results on various face recognition benchmarks show that, without any cost of extra annotations and computations, our method outperforms state-of-the-art methods. Moreover, the learnt representations can also well generalize to other face-related downstream tasks such as the facial attribute recognition with limited labeled data.

Three-dimensional analysis of hard and soft tissue changes in skeletal class II patients with high mandibular plane angle undergoing surgery.

This study aimed to study 3-dimensional (3D) changes of hard and soft tissues of skeletal class II patients after 2-jaw surgery and genioplasty. 32 adult patients diagnosed with mandibular hypoplasia who underwent 2-jaw surgery of maxillary impaction, mandibular advancement and genioplasty were enrolled. Cone-beam computed tomography and 3D stereophotogrammetry was conducted 1 week before and 6 months after surgery. Dolphin imaging software was used to establish a 3D digitizing model and 3D measurement system. Paired t-test was performed to compare the values before and after surgery. Pearson's correlation test assessed the degree of correlations between hard and soft tissue change. The mean impaction of the maxilla was 2.600 ± 3.088 mm at A. The mean advancement of the mandible was 7.806 ± 2.647 mm at B. There was a significant upward and forward movement for most landmarks of the nose and lip, while a significant decrease in nasal tip height (lateral view), upper lip height, and upper and lower vermilion height. The nose's width was significantly increased. For maxillary, Sn, Ac-r, Ac-l, and Ls demonstrated a significant correlation with A and U1 in the anteroposterior axis. However, there were no significant correlations among them in the vertical axis. For mandibular, Li demonstrated a significant correlation with L1 in the anteroposterior axis specifically for the mandible. Notably, correlations between the landmarks of the chin's hard and soft tissues were observed across all axes. The utilization of 3-D analysis facilitated a quantitative comprehension of both hard and soft tissues, thereby furnishing valuable insights for the strategic formulation of orthognathic treatment plans targeting patients with skeletal class II conditions.

The effect of vertical skeletal proportions on overbite changes in untreated adolescents: a longitudinal evaluation.

OBJECTIVES: To evaluate the change in overbite within an untreated cohort from 9 to 18 years of age and to compare age-related changes in overbite depth based on vertical skeletal proportion. MATERIALS AND METHODS: Lateral cephalograms were obtained from the American Association of Orthodontists Foundation (AAOF) Craniofacial Growth Legacy Collection Project. All cephalometric outcome measures were assessed at ages 9-11 (T1), 13-15 (T2), and 17-19 (T3) years. Generalized estimating equation (GEE) regression models were fit to examine the effect of MP-SN on overbite adjusted for age and gender. RESULTS: A total of 130 subjects from the Denver, Bolton Brush, and Oregon Growth Studies were included. Overbite was relatively constant from T1 to T3 irrespective of facial type, with a minor decrease (0.15 mm) being observed overall. There was a transient increase between T1 and T2 (0.31 mm) that was canceled out by changes during later adolescence. Based on the GEE regression model adjusted for time and gender, a minor but statistically significantly greater reduction in overbite arose as MP-SN increased (coefficient = -0.080; 95% confidence interval -0.12, -0.04; P < .01). CONCLUSIONS: In hyperdivergent subjects, a marginal decrease in overbite was observed from 9 to 18 years of age, with a transient increase from the period spanning 9-11 years to 13-15 years, which was negated in later adolescence. There are limited data to suggest that observation of vertical growth is required in most patients with marginally increased vertical facial proportions in the juvenile and pubertal phases.

Defining Ideal Pretarsal Rolls Through a Morphometric Analysis in Asians.

BACKGROUND: Pretarsal rolls are a crucial aesthetic feature. Despite numerous studies conducted on periorbital aesthetics, there remains a dearth of research on the ideal pretarsal rolls. OBJECTIVES: This study aimed to investigate 4 aesthetic characteristics of ideal pretarsal rolls: presence, width, proportion, and morphology. METHODS: Respondents (385, including 80 aesthetic specialists) were presented with 7 series of images of pretarsal rolls, including 2 series of pretarsal roll existence, 2 series of varying widths, 2 series of different ratios between pretarsal roll and palpebral fissure height, and 1 series about morphology. Participants were asked to rank each image within a given series from most attractive to least attractive. The rankings were then analyzed according to population demographics. RESULTS: The majority of respondents deemed images with pretarsal rolls to be more aesthetically pleasing (P < .001) than those without such features. Additionally, pretarsal rolls with a width of 5 mm (P < .001), a ratio to palpebral fissure height of 0.5:1 (P < .001), and a crescent shape (P < .001) were perceived as the most attractive. Moreover, individuals aged 40 or younger exhibited a significant preference for images with pretarsal rolls compared to older groups (P < .001), and females displayed a greater inclination toward a medium ratio of pretarsal roll to palpebral fissure height than males did (0.5:1 P = .003, 0.618:1 P < .001). CONCLUSIONS: This study validates the optimal characteristics of pretarsal rolls, which provides insight into pretarsal roll aesthetics and holds significant implications for surgical planning and effect assessment in future periocular procedures involving pretarsal rolls.

Global facial soft tissue thicknesses for craniofacial identification (2023): a review of 140 years of data since Welcker's first study.

This year (2023) marks 140 years since the first publication of a facial soft tissue thickness (FSTT) study. Since 1883, a total of 139 studies have been published, collectively tallying > 220,000 tissue thickness measurements of > 19,500 adults. In just the last 5-years, 33 FSTT studies have been conducted. Herein, we add these data (plus an additional 20 studies) to the 2018 T-Table to provide an update of > 81,000 new datapoints to the global tallied facial soft tissue depths table. In contrast to the original 2008 T-Table, some notable changes are as follows: increased FSTTs by 3 mm at infra second molar (ecm2-iM2'), 2.5 mm at gonion (go-go'), 2 mm at mid-ramus (mr-mr'), and 1.5 mm at zygion (zy-zy'). Rolling grand means indicate that stable values have been attained for all nine median FSTT landmarks, while six out of nine bilateral landmarks continue to show ongoing fluctuations, indicating further data collection at these landmarks holds value. When used as point estimators for individuals with known values across 24 landmarks (i.e., C-Table data), the updated grand means produce slightly less estimation error than the 2018 T-Table means (3.5 mm versus 3.6 mm, respectively). Future efforts to produce less noisy datasets (i.e., reduce measurement and sampling errors as much as possible between studies) would be useful.

Facial cues to physical strength are not always associated with facial masculinity: Comparative study of Europeans and Southern Siberians.

OBJECTIVES: The aim of our study was to compare morphometric patterns of facial sexual dimorphism with strength-face relationship in members of two distinct populations of European and Central Asian origin: Russians and Tuvans. METHODS: Handgrip strength (HGS) measures and facial photographs were collected from Russian (n = 233) and Tuvan (n = 187) men and women. We digitized 70 landmarks and semilandmarks on full-face and 54 landmarks and semilandmarks on profile photos. This was done to capture variation in facial morphology. After that, we performed the shape regressions of landmarks' coordinates upon sex and HGS. Results were visualized in forms of thin-plate deformation grids and geometric morphometric morphs. RESULTS: In both populations, HGS was associated significantly with male facial shape only. In Russian men, strength-related changes of facial shape were almost completely in direction of increase in male-typicality. This was especially evident for the relative lower facial width, which was higher in men compared to women, as well as in stronger men compared to weaker ones. On the contrary, in Tuvans the lower face was relatively narrower in men than in women. However, the facial shape of strong Tuvan men was also associated with relatively wider lower face. Our results indicate that the effect of strength on facial shape is relatively independent of facial sexual dimorphism. CONCLUSIONS: Our findings clearly demonstrate that physical strength is associated with the shape of the lower part of male faces even in populations with a mismatched direction of lower face sexual dimorphism.

The relationship between biological parameters and facial soft tissue thickness measured by ultrasound and its forensic implications.

Facial soft tissue thickness (FSTT) data are currently widely used in forensic and medical science. In the forensic sciences, they form the basis for craniofacial reconstruction and identification methods. Since there are few FSTT data in the Slovak population, this study aims to enrich the data in well-defined age categories, taking into account differences between sexes and body mass index (BMI). The sample consisted of 127 participants aged 17 to 86 years from Slovakia. In addition to biological sex and age information, stature and body weight were recorded to calculate BMI. Subsequently, 17 facial anthropometric landmarks were used to measure FSTT using a noninvasive General Electric LOGIQe R7 ultrasound device. The mean values of FSTT were greater in the mouth region in males and in the zygomatic and eye regions in females. Differences between males and females, regardless of sex and BMI, were significant only at two landmarks. When BMI and age were taken into account, there were differences in 12 of 17 landmarks. Linear regression results showed the strongest correlation of most landmarks with BMI, followed by age and sex. When the FSTT was estimated in association with sex/age/BMI, landmarks in the zygomatic, mandibular, and frontal regions were the best regressors. The results of the present study demonstrate that B-mode ultrasound measurements of FSTT can be used in facial reconstruction as a function of BMI, age, and sex of the subject. Furthermore, the present regression equations can help practitioners in the forensic/medical field to calculate individual tissue thickness.

Associations between the 3D position of the mental foramen with sagittal skeletal relationships (classes I, II, and III) and vertical facial growth patterns (normal, long, and short faces) in different ages and sexes: a retrospective cohort study of 360 CBCTs.

BACKGROUND: The 3D position of the mental foramen (MF) is of significant clinical value in dental implantology and mandibular surgeries or in local anesthesia. Despite its importance, it is not clearly known how the position of MF can alter in different individuals, since the literature on the associations between the MF position with vertical growth patterns is non-existent and those on links between the MF position and skeletal malocclusions are scarce. Therefore, we aimed to investigate these, for the first time, on cone-beam computed tomographies (CBCTs). METHODS: Archival CBCTs of 9 sub-groups (i.e., 3 skeletal Classes I, II, and III × 3 vertical growth patterns 'long face, short face, normal face') were collected by evaluating patients' SNA, SNB, ANB, facial angle, lower facial height, and FMA (n = 9 × 40 = 360). Included cases were older than 17 years and without any history of orthodontic/orthognathic treatments (243 women, 117 men, mean age: 22.28 ± 2.80 years). Perpendicular distances between the MF and 3 fixed bony structures (the mandibular symphysis [S/width], the mandibular ramus [R/length], and the mandibular lower cortex [C/height]) were measured on different sectional planes on both hemimandibles. Left- and right-side measurements were combined. Data were analyzed using the 3-way ANCOVA, Bonferroni, one-way ANOVA, Tamhane, Pearson, and t-test (α = 0.05). RESULTS: Width was the smallest in Class II and greatest in Class III cases (all P values < 0.000001, Bonferroni). It was the shortest in long faces and longest in short faces (all P values ≤ 0.00008). The inferior-superior height was larger in Class III than both Classes I and II (both P values ≤ 0.003); there was no significant difference between Classes I and II in terms of height (P = 0.684). Height was the largest in long faces and smallest in short faces (all P values < 0.000001). The anterior-posterior length was the largest in Class III and smallest in Class II (all P values < 0.000001). Length was larger in short-face people versus normal- or long-face individuals (P ≤ 0.00003); nevertheless, long and normal faces did not differ in terms of length (P = 0.448). Subjects' age was not correlated with their MF positions (P ≥ 0.579, Pearson coefficient). Sex dimorphism existed only for height (P = 0.009, t-test) but not for length or width. CONCLUSIONS: The MF position may considerably differ in various horizontal or vertical growth patterns and sexes. This should be noted in mandible surgeries.

Anatomical Characteristics, Relations, and Clinical Considerations of the Facial Index and Cephalic Index in Young Chileans Aged Between 18 and 21 Years / Características Anatómicas, Relaciones y Consideraciones Clínicas del Índice Facial e Índice Cefálico en Jóvenes Chilenos entre 18 y 21 Años

SUMMARY: Humans throughout history have shown similarities between both their cephalic and facial complexion, among certain ethnic groups, due to genetic and demographic factors. Several studies have demonstrated the different constitutions of specific groups of people in order to generate data of a certain population or group. The present research aims to preliminarily study the existence of possible relations between Cephalic Index and Facial Index among categories of individuals in an odontology student population from a private university in Santiago, Chile. Empirical, descriptive, and cross-sectional study. In this study, 129 students with age range 18-21 were taken as subjects in a non-probabilistic way. Regarding Cephalic Index (CI), the Retzius classification was used, and the Facial Index (FI) was measured considering the maximum height of the face, from nasion to gnathion (Na-Gn), and the maximum width, from right zygion to left zygion (Zr-Zl). In this study, 129 people were taken as sample, 82 females and 47 males. Among women, the most predominant cephalic biotype was brachycephalic (59.8 %), followed by mesocephalic (37.8 %), and dolichocephalic (2.4 %). On the other hand, men's most common biotype was mesocephalic (57.5 %), followed by brachycephalic (36.2 %), and dolichocephalic (6.4 %). Regarding facial biotype, both in female and male subjects the following pattern was shown: euryprosopic (F: 59.7 %, M: 59.6 %), mesoprosopic (F: 26.8 %, M: 29.8 %), and leptoprosopic (F: 13.4 %, M: 10.6 %). Facial parameters of the subjects (odontology students from a Chilean university) tend to be mostly euryprosopic, followed by mesoprosopic and leptoprosopic. Additionally, mesocephalic biotypes tend to be similar to other studies conducted in Chile.

Los seres humanos a lo largo de la historia han mostrado similitudes tanto entre su complexión cefálica como facial, entre ciertos grupos étnicos, debido a factores genéticos y demográficos. Varios estudios han demostrado las diferentes constituciones de grupos específicos de personas para poder generar datos de una determinada población o grupo. La presente investigación tiene como objetivo estudiar preliminarmente la existencia de posibles relaciones entre el Índice Cefálico y el Índice Facial entre categorías de individuos en una población de estudiantes de odontología de una universidad privada de Santiago, Chile, en un estudio empírico, descriptivo y transversal. En este estudio, se tomó como sujetos de forma no probabilística a 129 estudiantes con edades comprendidas entre 18 y 21 años. Respecto al Índice Cefálico (IC), se utilizó la clasificación de Retzius, y el Índice Facial (FI) se midió considerando la altura máxima de la cara, desde nasión hasta gnatión (Na-Gn), y el ancho máximo, desde cigio derecho a izquierdo. cigio (Zr-Zl). En este estudio se tomó como muestra 129 personas, 82 mujeres y 47 hombres. Entre las mujeres, el biotipo cefálico más predominante fue el braquicéfalo (59,8 %), seguido del mesocefálico (37,8 %) y el dolicocéfalo (2,4 %). Por otro lado, el biotipo más común en los hombres fue el mesocefálico (57,5 %), seguido del braquicéfalo (36,2 %) y el dolicocéfalo (6,4 %). Respecto al biotipo facial, tanto en sujetos femeninos como masculinos se mostró el siguiente patrón: euriprosópico (F: 59,7 %, M: 59,6 %), mesoprosópico (F: 26,8 %, M: 29,8 %) y leptoprosópico (F: 13,4 %, M: 10,6 %). Los parámetros faciales de los sujetos (estudiantes de odontología de una universidad chilena) tienden a ser en su mayoría euriprosópicos, seguidos de mesoprosópicos y leptoprosópicos. Además, los biotipos mesocefálicos tienden a ser similares a otros estudios realizados en Chile.

Gender Dimorphism of Skeletal Measurements and Dental Angle Classification in Orthodontic Patients.

AIM: The present study aimed to evaluate gender dimorphism of the skeletal and dental angles and measurements among different types of malocclusions in the Population of Jizan, Kingdom of Saudi Arabia (KSA). MATERIALS AND METHODS: Cephalometric data were retrieved from the archived records of 272 dental patients, comprising 134 males and 138 females. Skeletal and dental malocclusions in both the sub-groups were digitally studied. STATISTICAL ANALYSIS: The measurement reliability was assessed using the intra-class correlation coefficient (ICC). Non-parametric Mann-Whitney U tests were performed to evaluate the difference in skeletal and dental parameters between genders. The Chi-square test was done to determine the difference in malocclusion patterns amongst the gender. RESULTS: Statistical significance was noted in dental malocclusion (p-value = 0.003) and facial height, with females having a steeper mandible plan than males. The Sella-nasion-Nasion-Vertical line angles were reported high in females with no statistical significance. Linear cephalometric values were measured higher in males than females, whereas angular values and facial height parameters were lower in females than male. CONCLUSION: Within the limitation of this study, it could be concluded that there is a prominent difference measured in facial profiles of males and females with higher facial height in males. Clinical significance and limitations: These clinical outcomes will help orthodontists to analyze the accurate base angles and points to draft proper treatment plans considering the variation in the profile of males and females.

Impact of different cephalometric skeletal configurations on anatomic midface parameters in adults.

OBJECTIVES: Skull morphology and growth patterns are essential for orthodontic treatment, impacting clinical decision making. We aimed to determine the association of different cephalometric skeletal configurations on midface parameters as measured in 3D CT datasets. MATERIALS AND METHODS: After sample size calculation, a total of 240 fully dentulous patients between 20 and 79 years of age (mean age: 42 ± 15), who had received a CT of the skull within the scope of trauma diagnosis or intracranial bleeding, were retrospectively selected. On the basis of cephalometric analysis, using MPR reconstructions, patients were subdivided into three different vertical skull configurations (brachyfacial, mesofacial, dolichofacial) and the respective skeletal Class I, II, and III relationships. Anatomic parameters were measured using a three-dimensional post-processing console: the thickness of the maxillary and palatine bones as well as the alveolar crest, maxillary body and sutural length, width and height of the hard palate, maxillary facial wall thickness, and masseter muscle thickness and length. RESULTS: Individuals with brachyfacial configurations had a significantly increased palatal and alveolar ridge thicknesses compared to those with dolichofacial- or mesofacial configurations. Brachyfacial configurations presented a significantly increased length and thickness of the masseter muscle (4.599 cm; 1.526 cm) than mesofacial (4.431 cm; 1.466 cm) and dolichofacial configurations (4.405 cm; 1.397 cm) (p < 0.001). Individuals with a skeletal Class III had a significantly shorter palatal length (5.313 cm) than those with Class I (5.406 cm) and Class II (5.404 cm) (p < 0.01). Sutural length was also significantly shorter in Class III (p < 0.05). CONCLUSIONS: Skeletal configurations have an impact on parameters of the bony skull. Also, measurable adaptations of the muscular phenotype could result. CLINICAL RELEVANCE: The association between viscerocranial morphology and midface anatomy might be beneficial for tailoring orthodontic appliances to individual anatomy and planning cortically anchored orthodontic appliances.

Can smartphones be used for routine dental clinical application? A validation study for using smartphone-generated 3D facial images.

OBJECTIVES: To compare the accuracy of smartphone-generated three-dimensional (3D) facial images to that of direct anthropometry (DA) and 3dMD with the aim of assessing the validity and reliability of smartphone-generated 3D facial images for routine clinical applications. MATERIALS AND METHODS: Twenty-five anthropometric soft-tissue facial landmarks were labelled manually on 22 orthognathic surgery patients (11 males and 11 females; mean age 26.2 ± 5.3 years). For each labelled face, two imaging operations were performed using two different surface imaging systems: 3dMDface and Bellus3D FaceApp. Next, 42 inter-landmark facial measurements amongst the identified facial landmarks were measured directly on each labelled face and also digitally on 3D facial images. The measurements obtained from smartphone-generated 3D facial images (SGI) were statistically compared with those from DA and 3dMD. RESULTS: SGI had slightly higher measurement values than DA and 3dMD, but there was no statistically significant difference between the mean values of inter-landmark measures across the three methods. Clinically acceptable differences (≤3 mm or ≤5°) were observed for 67 % and 74 % of measurements with good agreement between DA and SGI, and 3dMD and SGI, respectively. An overall small systematic bias of ± 0.2 mm was observed between the three methods. Furthermore, the mean absolute difference between DA and SGI methods was highest for linear (1.41 ± 0.33 mm) as well as angular measurements (3.07 ± 0.73°). CONCLUSIONS: SGI demonstrated fair trueness compared to DA and 3dMD. The central region and flat areas of the face in SGI are more accurate. Despite this, SGI have limited clinical application, and the panfacial accuracy of the SGI would be more desirable from a clinical application standpoint. CLINICAL SIGNIFICANCE: The usage of SGI in clinical practice for region-specific macro-proportional facial assessment involving central and flat regions of the face or for patient education purposes, which does not require accuracy within 3 mm and 5° can be considered.

Soft tissue prediction in orthognathic surgery: Improving accuracy by means of anatomical details.

Three-dimensional virtual simulation of orthognathic surgery is now a well-established method in maxillo-facial surgery. The commercial software packages are still burdened by a consistent imprecision on soft tissue predictions. In this study, the authors produced an anatomically detailed patient specific numerical model for simulation of soft tissue changes in orthognathic surgery. Eight patients were prospectively enrolled. Each patient underwent CBCT and planar x-rays prior to surgery and in addition received an MRI scan. Postoperative soft-tissue change was simulated using Finite Element Modeling (FEM) relying on a patient-specific 3D models generated combining data from preoperative CBCT (hard tissue) scans and MRI scans (muscles and skin). An initial simulation was performed assuming that all the muscles and the other soft tissue had the same material properties (Homogeneous Model). This model was compared with the postoperative CBCT 3D simulation for validation purpose. Design of experiments (DoE) was used to assess the effect of the presence of the muscles considered and of their variation in stiffness. The effect of single muscles was evaluated in specific areas of the midface. The quantitative distance error between the homogeneous model and actual patient surfaces for the midface area was 0.55 mm, standard deviation 2.9 mm. In our experience, including muscles in the numerical simulation of orthognathic surgery, brought an improvement in the quality of the simulation obtained.

ANALYSIS OF PHOTOMETRIC FULL-FACE PARAMETERS WITH A DISTAL BITE TAKING INTO ACCOUNT THE TYPES OF MANDIBULAR GROWTH.

OBJECTIVE: The aim: Determination of the peculiarities of full-face aesthetics in patients aged 10-13 years with a distal bite with different types of mandibular growth. PATIENTS AND METHODS: Materials and methods: 74 patients aged 10-13 years with a distal bite and various types of mandibular growth took part in the study. The methods of photostatic image study described by I.I. Uzhumetskene (1970), V.P. Pereverzev (1979) were used in this research. RESULTS: Results: To determine the type of face, a gl-me: zy-zy index was calculated. Index values ranging from 0.84 to 0.879 are indicative of a mesoprosopic (medium) type of face, an index less than 0.839 defines a europrosopic (broad) type, an index exceeding 0.88 is characteristic of a leptoprosopic (narrow) type. The facial shape in all patients was determined by the Izar facial-morphological index. Similarly, the facial shape can be determined by the facial tapered angle (< FTA). In all groups of teenagers, a decrease in the angle is noted, which is indicative of an elongated, narrow face. To assess the ratio of the middle and lower parts of the face, the gl-sn:sn-me index was used, which is normally equal to 1. In our case, this index was higher than normal in all groups of children as compared to the control group (1.01±0.03). The p-p:zy-zy and p-p:go-go indices are indicative of the harmonious facial development transversally. CONCLUSION: Conclusions: Vertical and neutral-vertical type of mandibular growth results in a narrow (leptoprosopic) type of face; medium (mesoprosopic) and wide (europrosopic) types of face result from neutral, horizontal and neutral-horizontal types of growth. Irrespective of the type of mandibular growth, all patients with a distal bite have a short lower third of the face. The strongest aesthetic changes are reported in the group of patients with a predominance of the hori¬zontal type of mandibular growth.